Problem. Fast refresh mode stay always activated....

Anything about GOverlay Plus and the devices supported

Problem. Fast refresh mode stay always activated....

Postby jon.191023 » Tue Feb 13, 2024 1:49 am

I don't understand but since these last days after i Resized pictures on my profil. The fast Refresh mode activated himself on my LAN without action on my side.
I tried to force normal mode from server side but it doesn't change anything...
Image
From my GoverlayPlus app :
Image
From my server side account configuration

Do you have an explanation about it ?

I Would like to turn off that mode in order to reduce stress on CPU hardware calls.

jon.191023
 
Posts: 42
Joined: Mon Jan 22, 2024 2:55 am

Re: Problem. Fast refresh mode stay always activated....

Postby TheLaGmAn » Tue Feb 13, 2024 1:45 pm

Fast refresh mode will deactivate itself 30 seconds to 1 minute after the profile does not request it, so if you have it set to normal mode, it can take up to 1 minute to disable it.
Do you still have it on fast refresh? If so, we will need to do a teamviewer session to check it out
User avatar
TheLaGmAn
Site Admin
 
Posts: 1028
Joined: Wed Feb 26, 2014 8:32 pm

Re: Problem. Fast refresh mode stay always activated....

Postby jon.191023 » Tue Feb 13, 2024 5:04 pm


jon.191023
 
Posts: 42
Joined: Mon Jan 22, 2024 2:55 am

Re: Problem. Fast refresh mode stay always activated....

Postby TheLaGmAn » Tue Feb 13, 2024 5:45 pm

i think i found the issue why it wouldnt go back to normal mode.
Can you give it a try now? reboot the device if after a profile re-load it still doesnt work.
User avatar
TheLaGmAn
Site Admin
 
Posts: 1028
Joined: Wed Feb 26, 2014 8:32 pm

Re: Problem. Fast refresh mode stay always activated....

Postby jon.191023 » Tue Feb 13, 2024 6:10 pm

IT WORKS ONCE AGAIN !!!!!
The client device doesn't request fast refresh mode in the logs after the last reboot.
Very nice job.

Thx a lot for your help !!

jon.191023
 
Posts: 42
Joined: Mon Jan 22, 2024 2:55 am


Return to About GOverlay Plus



Who is online

Users browsing this forum: No registered users and 2 guests

cron