PresentMon data

[SubSonix]

That fixed some of the sensors and broke the date formatting again.

[SubSonix]

Fixed the broken sensors by manually updating the Open Hardware Monitor dll - the one you bundle is from 2016.

This might have technically solved the sensor issue with "1.6.9.30_sda" but I assumed the dll was up to date. I'll test it now and report back.

*EDIT* It did not

So just need you to fix the date formatting again in "1.6.9.31_pzo" and all should be working again - with the updated Open Hardware Monitor dll.


Thanks again for your continued support, it is greatly appreciated

[SubSonix]

I may have spoken too soon, restarted GOverlay a couple of times (switching versions) and now the date formatting is working correctly with "1.6.9.31_pzo"

Still having other issues though, just getting as much info and I'll update.

[SubSonix]

Okay, so with "1.6.9.31_pzo"

The sensors are back, the date formatting is working. BUT: Any OHMD sensors do not actually show on the device.

*EDIT* Testing a fresh install of GOverlay with the newest Open Hardware Monitor dll - will report back.

*Second EDIT* Fresh install of 1.6.9 then updated to 1.6.9.31_pzo, still no sensors on screen, with the included Open Hardware Monitor dll or the latest.

Selecting any sensor from LibreHardwareMonitor (with the bundled dll) don't show on the device either.

I took a "screenshot" from inside the software, and it doesn't show the sensors either.

Side note, updating LibreHardwareMonitor dll to the latest causes GOverlay to crash. I don't need it, but thought you might like to know.

Sending you a new log file, as there's still errors referring to OHMD.

[SubSonix]

try 1.6.9.31_pzo

Any news?

[TheLaGmAn]

thanks for the feedback
try 1.6.9.31_fyk
see if the sensors now work

[SubSonix]

Worked perfectly *after* I updated OHM to 0.9.7 - My CPU is Zen 3, so makes sense.

Thank you for everything

[TheLaGmAn]

before 0.9.7 was working but just missing some sensors?

[SubSonix]

Yes, all seemed to be working correctly

v0.9.7 only has one change which is "Added AMD family 19h (Zen 3) CPU support." hence why I needed it lol

Logically, if and when I upgrade my hardware I'll have to move away from OHM, but for now, I'm very happy with the data I have on the device

Thank you again, all the correspondence and support over the years is greatly appreciated!