Page 1 of 1
Bug: display doesn't turn off with ethernet/wired

Posted:
Fri Jan 05, 2024 9:21 pm
by Clone003
I noticed my GOverlay Plus display does not turn off anymore after I connected an Ethernet cable to it with the included hub.
I tried both syncing the display to the 'any app' and the specific app I have, and neither works.
The sensors would just pause once the app or my computer is turned off.
It worked fine before while I was connected wirelessly through Wi-Fi.
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 07, 2024 5:09 pm
by TheLaGmAn
keep it on any, it will be easier for debuging.
It doesnt turn off for computer power-off or monitor power-off, or both?
If you havent tested monitor power-off, can you test it with that, and keep goverlay open and see if in the goverlay logs there is any error, and also, keep the unit console open (go to the portal, devices, open console), do the monitor off, monitor on, and send me the logs you have on the console thru PM to see if there is any error there
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 07, 2024 5:15 pm
by Clone003
It turns off fine when my monitor turns off.
Last night it seems to have turned off when I turned off my computer.
Although, when I exit GOverlayPlus, the display will stay on.
I exit it by right-clicking the tray icon and clicking Exit.
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 14, 2024 9:37 pm
by Clone003
Seems to be inconsistent. During the past week I noticed that sometimes it would turn off the display when I shutdown my Windows PC.
Sometimes it would stay on. When it stays on, it would not turn off.
After waking up, I noticed that GOverlay Plus would still be on.
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 14, 2024 9:55 pm
by TheLaGmAn
does it happen with monitor off or all the cases are from shutdown?
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 14, 2024 10:29 pm
by Clone003
Just shutdown
Monitor off works fine. GOverlay Plus also turns off the display.
Although at one point when my monitors turned off, the GOverlayPlus process just died, and my display has the disconnected icon flashing.
But that might be a fluke
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 14, 2024 10:48 pm
by TheLaGmAn
the disconnected icon flashing means it lost connection with the goverlay server, that could of been a connection drop.
Let me add a force turn off with the selected app if the app is not running, so even if the app didnt tell goverlay it shutdown, when it stops reporting, the screen will turn off, and we can test it that way.
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Sun Jan 14, 2024 11:24 pm
by TheLaGmAn
try marking this option

And see if it works correctly now, it should
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Mon Jan 15, 2024 2:58 pm
by Clone003
Gave it a shot, and it works now.
I simulated it by ending the task in Task Manager.
It would turn off within 10 seconds of ending the task
If the display power is set to any app, it will still stay on though.
Re: Bug: display doesn't turn off with ethernet/wired

Posted:
Mon Jan 15, 2024 4:25 pm
by TheLaGmAn
closing the app from the task manager, im not sure if it gives goverlay the oportunity to report that the app is being closed, so it can notify the display to shut down.
The "force" feature works by actively checking if the goverlay app is connected to the goverlay servers, and when its not, it will turn off the screen.
I will still check to see if there is any issue with the normal shutdown that wouldnt notify for the screen turn off, but i guess for now, this feature will work