FR: Restart button in context menu?

[Clone003]

Alright cool. Using the beta version now.
Will update in a reply, if it occurs again.

It also outputs the log into a text file from startup now.
Thanks

[Clone003]

Happened again.
Restarting GOverlayPlus without touching HWInfo fixed the issue per usual

I attached the logfile from today.
Lines 588 - 629 has messages with the error "HWiNFO is missing the sensor *"

[Clone003]

and today too

[TheLaGmAn]

im still checking this.
what version of hwinfo are you using?
if you are on 7, have you tried when the sensors are zero, going to hwinfo settings and checking the "shared memory support" is enabled, and if it is, disable, hit ok, enter again and enable it again and see if the sensors appear?

https://prnt.sc/10ha3s3

[Clone003]

I'm on version 6.42-4360, cause I'm too lazy to buy the latest version.
I don't touch HWinfo when this problem comes up.
I simply restart GOverlay Plus and it fixes itself

[TheLaGmAn]

also, as a temporary workaround.
Check if when the sensors are zero, if in goverlayapp, you go to home > sensors view and hit on "refresh sensors" the sensors start working

[Clone003]

Ok. I'll keep that in mind next time it happens
I'll let you know if it fixes it instead of restarting

[TheLaGmAn]

actually, good news, i think i found the issue.

try the beta

Hidden Message: 

You need to reply in this topic to see the message.

I also added an option on the general settings for a "delayed startup", you shouldnt need this, no one should need it, but i added it just in case.
In this case the issue i found was hwinfo not being available when goverlay started and it failed to re-load hwinfo sensors when it became available, the delay would of fixed this but then again, i prefer to fix the issue in the first place instead of the workaround.

[Clone003]

Alright I installed the beta.
I'll let you know when I run into the problem again

[Clone003]

Happened again.
Tried 'refreshing sensors' but it seems like that just displays "HWiNFO is missing the sensor *" in the logs without fixing the issue.
Fixed it again by simply exiting and relaunching GOverlayPlus

I turned on the delay, so we'll see if it happens again.
Let me know if you want me to turn off the delay for troubleshooting

Appreciate the support btw